Products

Measurements

Choose slat

Finishing

Operation

Measurement and installation instructions

Add horizontal blind wood

Measurements

Numbre (Pieces)

Width (cm)

Height (cm)

Installation height (cm)

Open

Rotate

€ 0.00 incl VAT

Diaz horizontal blinds wood

Charm, this word perfectly describes what wooden blinds exude. Wooden blinds are not only used in classic interiors, because of the trendy possibilities you will also find it more and more in more modern interiors.

Wooden blinds consist of a steel headrail that is covered with a valance in the same colour as the wooden slats so that there is no contrast between the different materials. You can perfectly finish your product according to your own style by choosing a laddercord or laddertape.

In addition to a beautiful look, a wooden blind is also very functional. You can determine the incidence of light and/or privacy yourself by orienting the slats. When the slats are completely closed, you can also completely darken a room.

Measurement inside the window opening

The window decoration is placed between the window frame or the walls.
Measure the width in different places each time and then take the smallest size.

Finished width = smallest measured width - 1cm

Next, also measure the height in different places and also take the smallest size here.

Finished height = smallest measured height - 1 cm
Finished height = smallest measured height - 2 cm

Measurement outside the window opening

The window decoration is placed on the window frame or the wall.
In this case, you can choose the desired overlap.

To do so, measure the width of the window frame and choose the overlap.

Finished width = measured width + desired overlap

You can also choose the desired overlap in height.
To do so, measure the height of the window frame and choose the overlap.

Finished height = measured height + desired overlap

Child Safety

It was decided at European level that interior blinds and window decoration should meet new requirements in terms of Child Safety. These new requirements relate to the risk that cord and/or chain loops can pose to young children. (European Standards: EN 13120, EN 16433 and EN 16434)

The general rule is that the controls must always be at least 150 cm above the ground. In the ordering process you should always specify the installation height. Based on this, we will provide the chain or cord control with the correct length. Each product is also supplied with a safety device with which you must tension the chain or cord (laterally). This should ensure that young children cannot stick their heads through the cord or chain loop and thus avoid the risk of strangulation.

Packet widths

height	50 cm	100 cm	150 cm	200 cm	250 cm	300 cm
slat width
50 mm ladder cord	± 13 cm	± 17 cm	± 21 cm	± 25 cm	± 29 cm	± 33 cm
50 mm ladder tape	± 14 cm	± 18 cm	± 23 cm	± 28 cm	± 32 cm	± 37 cm

Mounting of your horizontal blind

We are constantly working on our customer experience and the perception of our products. Soon we will place short instructional videos online in which the mounting will be shown step by step. In the meantime, you can use the installation instructions below. These explain step by step which things you need to pay attention to during the installation and operation of your horizontal blind.

If you have any questions or encounter problems during the mounting of your horizontal blind you can contact us online or contact the Diaz distributor where you picked up the product.

Handleiding horizontale jaloezie hout nl.pdf
Mode d'emploi store à bandes horizontales en bois fr.pdf

Products

Information

Webshop